###################
# engine Settings #
###################

[database]
db_user="aura_engine"
db_name="aura_engine"
db_pass="***change-me***"
db_host="localhost"

[monitoring]
# how often should i check the diskspace. defaults to 600s = 10m
diskspace_check_interval=20
# under which value should i start sending admin mails. possible values k, M, G, T or no metric prefix. defaults to 2G
diskspace_warning_value=1G
# under which value should i stop recording. defaults to 200M
diskspace_critical_value=100M

[mail]
mail_server=""
mail_server_port=""
mail_user=""
mail_pass=""
# if you want to send multiple adminmails, make them space separated
admin_mail="david@subsquare.at gogo@servus.at"
# with from mailadress should be used
from_mail="monitor@aura.py"
# The beginning of the subject. With that you can easily apply filter rules with any mail client
mailsubject_prefix="[AURA Engine]"

[dataurls]
# The URL to get the Calendar via PV/Steering
calendarurl="http://localhost:8000/api/v1/playout"
# The URL to get show details via PV/Steering
api_show_url="http://localhost:8000/api/v1/shows/${ID}/"
# The URL to get playlist details via Tank
importerurl="http://localhost:8040/api/v1/shows/${SLUG}/playlists"
# how often should the calendar be fetched in seconds (This determines the time of the last change before a specific show)
fetching_frequency=3600

# sets the time how long we have to fade in and out, when we select another mixer input
# values are in seconds
# this is solved on engine level because it is kind of tough with liquidsoap
[fading]
fade_in_time="0.5"
fade_out_time="2.5"

#######################
# LiquidSoap Settings #
#######################

# all these settings from here to the bottom require a restart of the liquidsoap server

[user]
# the user and group under which this software will run
daemongroup="david"
daemonuser="david"

[socket]
socketdir="/home/david/code/aura/aura-engine/modules/liquidsoap"

[logging]
logdir="/var/log/aura"
# possible values: debug, info, warning, error, critical
loglevel="info"

# track_sensitive => fallback_folder track sensitivity
# max_blank => maximum time of blank from source (float)
# min_noise => minimum duration of noise on source to switch back over (float)
# threshold => power in dB under which the stream is considered silent (float)
fallback_max_blank="10."
fallback_min_noise="1."
fallback_threshold="-60."

[soundcard]
# choose your weapon
# if you are starving for pain in the ass choose alsa
# if you don't care about latency choose pulseaudio
# if you want low latency and a bit of experimenting, choose jack
soundsystem="alsa"

# you can define up to 5 inputs and outputs
# it is tested with
#  - ALSA with ONE input and ONE output
#  - pulseaudio with ONE input and ONE output (should work with multiple ins/outs)
#  - jack with multiple inputs and outputs
#
# boundaries:
#  - if you use jack, you have to kill liquidsoap. somehow liquidsoap cannot disconnect from jackd when shutting down
#
# with alsa you have to write the devicenames like hw:0
# with pulse and jack => an non empty value means it is used
# devices with empty string are ignored and not used
input_device_0="hw:0"
input_device_1=""
input_device_2=""
input_device_3=""
input_device_4=""
# same same, but different
output_device_0="default"
output_device_1=""
output_device_2=""
output_device_3=""
output_device_4=""

# if you are using alsa, you most probably have to tweak these values
# out of the box you will hear alot of cracklings and artifacts

# alsa_buffer => int
alsa_buffer="8192"
# alsa_buffer_length => int
alsa_buffer_length="25"
# alsa_periods => int
alsa_periods="0"
# frame_duration => double
frame_duration=""
# frame_size => int
frame_size=""

#####################
# Recorder Settings #
#####################

# you can define up to 5 recorder types.
# aac, flac, mp3, ogg, opus and wav is supported

[recording]
# flac example
# enable this recorder. everything else than 'y' is considered as disabled
rec_0="n"
# first set a folder
rec_0_folder="/var/audio/rec/flac"
# after how many minutes the recording will be cut
rec_0_duration="30"
# file (or encoding-) type
rec_0_encoding="flac"
# bitrate (with encoding types without bitrate like flac or wav it is substituted. 32 => very poor quality. 320 => very high quality)
rec_0_bitrate="128"
# channels: everything else than 2 is considered as mono
rec_0_channels="2"

# aac example
rec_1="n"
rec_1_folder="/var/audio/rec/aac"
rec_1_duration="30"
rec_1_encoding="aac"
rec_1_bitrate="64"
rec_1_channels="2"

# mp3 example
rec_2="n"
rec_2_folder="/var/audio/rec/mp3"
rec_2_duration="30"
rec_2_encoding="mp3"
rec_2_bitrate="32"
rec_2_channels="2"

# ogg example
rec_3="n"
rec_3_folder="/var/audio/rec/ogg"
rec_3_duration="30"
rec_3_encoding="ogg"
rec_3_bitrate="320"
rec_3_channels="2"

# opus example
rec_4="n"
rec_4_folder="/var/audio/rec/opus"
rec_4_duration="30"
rec_4_encoding="opus"
rec_4_bitrate="32"
rec_4_channels="2"

# wav example
#rec_4="n"
#rec_4_folder="/var/audio/rec/wav"
#rec_4_duration="30"
#rec_4_filetype="wav"
#rec_4_bitrate="320"
#rec_4_channels="2"

###################
# Stream Settings #
###################

# You can define up to outgoing 5 streams
# aac, flac, mp3, ogg and opus is supported

[stream]
# defines enabled or not
stream_0="y"
# possible values: aac, flac, mp3, ogg, opus (depending on what liquidsoap-plugins you installed)
stream_0_encoding="aac"
# bitrate (with encoding types without bitrate like flac or ogg it is substituted. 32 => very poor quality. 320 => very high quality)
stream_0_bitrate="128"
# how many channels? everything else than 2 is considered as mono
stream_0_channels="2"
# to where we are streaming..?
stream_0_host="localhost"
# and which port?
stream_0_port="8888"
# the name of the mountpoint
stream_0_mountpoint="aura-test-0.aac"
# username
stream_0_user="source"
# and the password
stream_0_password="hack-me"
# stream url
stream_0_url="http://www.fro.at"
# the name of the stream
stream_0_name="AURA Test Stream 0"
# the genre of the stream
stream_0_genre="mixed"
# description of the stream
stream_0_description="Test Stream 0"

stream_1="y"
stream_1_encoding="flac"
stream_1_bitrate="128"
stream_1_channels="2"

stream_1_host="localhost"
stream_1_port="8888"
stream_1_mountpoint="aura-test-1.flac"
stream_1_user="source"
stream_1_password="hack-me"

stream_1_url="http://www.fro.at"
stream_1_name="AURA Test Stream 1"
stream_1_genre="mixed"
stream_1_description="Test Stream 1"

stream_2="y"
stream_2_encoding="mp3"
stream_2_bitrate="64"
stream_2_channels="2"

stream_2_host="localhost"
stream_2_port="8888"
stream_2_mountpoint="aura-test-2.mp3"
stream_2_user="source"
stream_2_password="hack-me"

stream_2_url="http://www.fro.at"
stream_2_name="AURA Test Stream 2"
stream_2_genre="mixed"
stream_2_description="Test Stream 2"

stream_3="y"
stream_3_encoding="ogg"
stream_3_bitrate="64"
stream_3_channels="2"

stream_3_host="localhost"
stream_3_port="8888"
stream_3_mountpoint="aura-test-3.ogg"
stream_3_user="source"
stream_3_password="hack-me"

stream_3_url="http://www.fro.at"
stream_3_name="AURA Test Stream 3"
stream_3_genre="mixed"
stream_3_description="Test Stream 3"

stream_4="y"
stream_4_encoding="opus"
stream_4_bitrate="64"
stream_4_channels="2"

stream_4_host="localhost"
stream_4_port="8888"
stream_4_mountpoint="aura-test-4.opus"
stream_4_user="source"
stream_4_password="hack-me"

stream_4_url="http://www.fro.at"
stream_4_name="AURA Test Stream 4"
stream_4_genre="mixed"
stream_4_description="Test Stream 4"