Commit 53182aae authored by Chipp Jansen's avatar Chipp Jansen Committed by node
Browse files

Update on Overleaf.

parent 3c4f0f5d
......@@ -117,8 +117,9 @@ Here's a step-by-step tear down of the device. You'll need:
\end{figure}
\paragraph{Opening the case}
You will see that the NEOS (Figure \ref{fig:outside-iso}) has a leg that unfolds (Figure \ref{fig:front}). Looking underneath the camera reveals some addition information (Figure \ref{fig:underneath}), notably the MAC (Media Access Control \footnote{\url{https://en.wikipedia.org/wiki/MAC_address}} address. The MAC address is handy to identify the device once it joins a network.
You will that the NEOS (Figure \ref{fig:outside-iso}) has a leg that unfolds (Figure \ref{fig:front}).
Unscrew the two bottom screws (Figure \ref{fig:underneath-screws})
%
% Opening the case
......@@ -143,56 +144,56 @@ You will that the NEOS (Figure \ref{fig:outside-iso}) has a leg that unfolds (Fi
\centering
\includegraphics[width=0.3\textwidth]{figures/underneath}
\caption{Underneath the NEOS V2 Smart Cam}
\label{fig:front}
\label{fig:underneath}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/underneath-screws}
\caption{Underneath Screws}
\label{fig:front}
\label{fig:underneath-screws}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/underneath-back}
\caption{Underneath Back}
\label{fig:front}
\label{fig:underneath-back}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/underneath-prying}
\caption{Underneath Prying}
\label{fig:front}
\label{fig:underneath-prying}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/underneath-pried}
\caption{Underneath Pried}
\label{fig:front}
\label{fig:underneath-pried}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/underneath-pried2}
\caption{Underneath Pried 2}
\label{fig:front}
\label{fig:underneath-pried2}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/open-top}
\caption{Open Top}
\label{fig:front}
\label{fig:open-top}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/open-pried}
\caption{Open Pried}
\label{fig:front}
\label{fig:open-pried}
\end{figure}
% \paragraph{Removing the Assembly}
......@@ -203,21 +204,21 @@ You will that the NEOS (Figure \ref{fig:outside-iso}) has a leg that unfolds (Fi
\centering
\includegraphics[width=0.3\textwidth]{figures/with-out-middle-plastic}
\caption{Internals without middle plastic}
\label{fig:front}
\label{fig:with-out-middle-plastic}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/guts}
\caption{Internals spread out}
\label{fig:front}
\label{fig:guts}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/guts-middle-board-good}
\caption{Internals middle board, in the upper right is the debug port}
\label{fig:front}
\label{fig:guts-middle-board}
\end{figure}
\subsubsection{Debug Ports}
......@@ -226,21 +227,21 @@ You will that the NEOS (Figure \ref{fig:outside-iso}) has a leg that unfolds (Fi
\centering
\includegraphics[width=0.3\textwidth]{figures/guts-debug-port-good}
\caption{Internals middle board, debug port}
\label{fig:front}
\label{fig:guts-debug-port}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/debug-port-connect}
\caption{Connecting to the debug port}
\label{fig:front}
\label{fig:debug-port-connect}
\end{figure}
\begin{figure}[h!]
\centering
\includegraphics[width=0.3\textwidth]{figures/rpi-connect}
\caption{Connecting to the Raspberry Pi 4's Serial Port (the UART)}
\label{fig:front}
\label{fig:rpi-connect}
\end{figure}
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment